Installation Configuration Quiz

Installation Configuration Quiz

1. Real-Mode SCSI CD-ROM support has been added to the Windows 98 Startup Disk.
True False
2. What file contains the Boot Loader Menu ?
NTOSKRNL.exe
NTLDR.exe
BOOTLOG.txt
BOOT.ini
3. In win 9x some hardware devices and programs require that drivers or files be loaded in real-mode in order for them to work properly. What file loads these drivers ?
autoexec.bat
config.sys
setver.exe
win386.exe
4. Windows 95 includes a generic CD-ROM driver on its start up disk.
True False

5. Ntldr reads the boot.in file, and displays the the operating systems Boot Menu. If Windows 2000 is selected, NTLDR will run NTDETECT.COM. If another OS is selected, NTLDR will load and run what file and pass control to it.
BOOTSECT.DOS
BOOTSECT.COM
BOOTSECT.SYS
BOOTSECT.BAT
6. John wants to upgrade from Windows 95 to windows 98, but wants to change his current settings, what would be the best way for John to do this ?
Run setup from windows 95
Run setup from MS-DOS
If upgrading you can not change the original settings
He must format his drive, and use a start up disk
7. You can install both Windows 95 and Windows 98 in a multiple-boot configuration.
True False
8. Windows 2000 supports dual booting with Windows 3.1, and Windows for Workgroups 3.11 operating systems.
True False
9. To set up a dual-boot configuration between MS-DOS or Windows 95 and Windows 2000, you should install Windows 2000 first, so it can monitor the installation of these operating systems, and add them to the boot menu.
True False
10. To create start up disks for win 2000, you need how many blank, formatted, 1.44-MB floppy disks.
1
2
3
4
11. When partitioning in win 98, if you enable large disk support, any drives created will be ?
FAT 16
FAT 32
NTFS
NTFS4
12. Windows 2000 can not be installed on a compressed drive.
True False
13. What file checks the Registry for services that are marked to load automatically and will load them ?
screg.exe
io.sys
ntdetect.exe
load.exe
14. In Windows 98 to enter Safe Mode With Networking you would ?
press F4 while booting
press F8 while booting
press F5 while booting
Safe Mode With Networking is not supported in Windows 98
15. You can run the Windows 98 Setup program (Setup.exe) from the Windows 3.1x interface.
True False
16. In win 2000 what is the graphical tool for managing disks and volumes ?
Fdisk
Drive Console
Disk Administrator
Disk Management
17. Some files that are copied to the Windows 95 Startup Disk are ?
attrib.exe, command.com, fdisk.exe
autoexec.bat, command.com, fdisk.exe
Btdosm.sys, attrib.exe, command.com
attrib.exe, autoexec.bat, fdisk.exe
18. Safe Mode, starts Windows 2000 using only basic files and drivers (mouse, serial mice; monitor; keyboard; mass storage; base video; default system services; and no network connections).
True False
19. If you intend to create a dual-boot system with Windows NT 4 and Windows 2000 as the only installed operating systems, Windows 2000 will automatically upgrade any NTFS partitions it finds on your system to NTFS 5.
True False
20. In win 2000 you must be logged on as an administrator or a member of the Administrators group to configure a device using the Add/Remove Hardware wizard in Control Panel or Device Manager.
True False
21. To delete a partition or logical drive, what command could you use ?
format
fdisk
deltree
scandisk
22. Startup disks created with previous versions of Windows are not compatible with Windows 98.
True False
23. For a dual boot of Windows 2000 with Windows 95 or MS-DOS, the primary partition must be formatted as FAT.
True False
24. To create start up disks for NT4 you need how many blank, formatted, 1.44-MB floppy disks.
1
2
3
4
25. In win 98, if the Config.sys file does not exist, what file loads the following required drivers Ifshlp.sys, Himem.sys, and Setver.exe ?
autoexec.bat
win.com
io.sys
dblbuff.sys
26. Can Windows NT4 read and write too a drive formatted with NTFS5 ?
NT4 can read but not write too an NTFS5 partition
NT4 can not read or write too an NTFS5 partition
NT4 can read and write too a drive formatted with NTFS5, only if service pack 6 is installed
NT4 can read and write too a drive formatted with NTFS5, only if service pack 4 is installed
27. In win 2000 what command creates a new root directory and file system for a hard disk ?
Format
Fdisk
Ntdisk
28. In win 2000 the format command can check for bad areas on the disk, and it can delete all data on the disk.
True False

Installation Configuration Answers

1. Real-Mode SCSI CD-ROM support has been added to the Windows 98 Startup Disk.
True False
Correct answer: True
2. What file contains the Boot Loader Menu ?
NTOSKRNL.exe
NTLDR.exe
BOOTLOG.txt
BOOT.ini
Correct answer: BOOT.ini
3. In win 9x some hardware devices and programs require that drivers or files be loaded in real-mode in order for them to work properly. What file loads these drivers ?
autoexec.bat
config.sys
setver.exe
win386.exe
Correct answer: config.sys
4. Windows 95 includes a generic CD-ROM driver on its start up disk.
True False
Correct answer: False
Explanation: Windows 98 does.
5. Ntldr reads the boot.in file, and displays the the operating systems Boot Menu. If Windows 2000 is selected, NTLDR will run NTDETECT.COM. If another OS is selected, NTLDR will load and run what file and pass control to it.
BOOTSECT.DOS
BOOTSECT.COM
BOOTSECT.SYS
BOOTSECT.BAT
Correct answer: BOOTSECT.DOS
6. John wants to upgrade from Windows 95 to windows 98, but wants to change his current settings, what would be the best way for John to do this ?
Run setup from windows 95
Run setup from MS-DOS
If upgrading you can not change the original settings
He must format his drive, and use a start up disk
Correct answer: Run setup from MS-DOS
Explanation: If your computer is running Windows 95 but you want to change its current settings, start Setup from MS-DOS. With this method, Setup displays dialog boxes that let you change or choose the following settings: Installation directory, Components you want to install, User name and company
7. You can install both Windows 95 and Windows 98 in a multiple-boot configuration.
True False
Correct answer: False
Explanation: Windows 98 is intended as an upgrade to Windows 95 and will try to use the same boot file.
8. Windows 2000 supports dual booting with Windows 3.1, and Windows for Workgroups 3.11 operating systems.
True False
Correct answer: True
9. To set up a dual-boot configuration between MS-DOS or Windows 95 and Windows 2000, you should install Windows 2000 first, so it can monitor the installation of these operating systems, and add them to the boot menu.
True False
Correct answer: False
Explanation: You should install Windows 2000 last. Otherwise, important files needed to start Windows 2000 could be overwritten and these other OS's might reconfigure hardware settings.
10. To create start up disks for win 2000, you need how many blank, formatted, 1.44-MB floppy disks.
1
2
3
4
Correct answer: 4
11. When partitioning in win 98, if you enable large disk support, any drives created will be ?
FAT 16
FAT 32
NTFS
NTFS4
Correct answer: FAT 32
Explanation: If you enable large disk support, any drives created will be FAT32. You will have to use a boot disk created from the OS you used to partition the drive, as win 95/NT cannot read FAT32 partitions (win 95 ORS 2 does support Fat32)
12. Windows 2000 can not be installed on a compressed drive.
True False
Correct answer: False
Explanation: Yes Windows 2000 can be installed on a compressed drive, if the drive was compressed with the NTFS file system compression utility.
13. What file checks the Registry for services that are marked to load automatically and will load them ?
screg.exe
io.sys
ntdetect.exe
load.exe
Correct answer: screg.exe
14. In Windows 98 to enter Safe Mode With Networking you would ?
press F4 while booting
press F8 while booting
press F5 while booting
Safe Mode With Networking is not supported in Windows 98
Correct answer: Safe Mode With Networking is not supported in Windows 98
15. You can run the Windows 98 Setup program (Setup.exe) from the Windows 3.1x interface.
True False
Correct answer: True
16. In win 2000 what is the graphical tool for managing disks and volumes ?
Fdisk
Drive Console
Disk Administrator
Disk Management
Correct answer: Disk Management
Explanation: Disk Management, is a graphical tool for managing disks and volumes. It supports partitions, logical drives, new dynamic volumes, and remote disk management.
17. Some files that are copied to the Windows 95 Startup Disk are ?
attrib.exe, command.com, fdisk.exe
autoexec.bat, command.com, fdisk.exe
Btdosm.sys, attrib.exe, command.com
attrib.exe, autoexec.bat, fdisk.exe
Correct answer: attrib.exe, command.com, fdisk.exe
Explanation: The files that are copied to the Windows 95 Startup Disk are: attrib.exe, command.com, drvspace.bin, ebd.sys, edit.com, fdisk.exe, format.com, io.sys, msdos.sys, regedit.exe, scandisk.exe, scandisk.ini, and sys.com
18. Safe Mode, starts Windows 2000 using only basic files and drivers (mouse, serial mouse; monitor; keyboard; mass storage; base video; default system services; and no network connections).
True False
Correct answer: False
Explanation: Windows 2000 does not load serial mice in safe mode.
19. If you intend to create a dual-boot system with Windows NT 4 and Windows 2000 as the only installed operating systems, Windows 2000 will automatically upgrade any NTFS partitions it finds on your system to NTFS 5.
True False
Correct answer: True
20. In win 2000 you must be logged on as an administrator or a member of the Administrators group to configure a device using the Add/Remove Hardware wizard in Control Panel or Device Manager.
True False
Correct answer: True
21. To delete a partition or logical drive, what command could you use ?
format
fdisk
deltree
scandisk
Correct answer: fdisk
Explanation: With Fdisk You can do the following: Create a partition or logical drive. Set the active partition. Delete a partition or logical drive. Display partition information.
22. Startup disks created with previous versions of Windows are not compatible with Windows 98.
True False
Correct answer: True
23. For a dual boot of Windows 2000 with Windows 95 or MS-DOS, the primary partition must be formatted as FAT.
True False
Correct answer: True
Explanation: For a dual boot with Windows 95 OSR2 or Windows 98, the primary partition must be formatted as FAT or FAT32, not NTFS.
24. To create start up disks for NT4 you need how many blank, formatted, 1.44-MB floppy disks.
1
2
3
4
Correct answer: 4
25. In win 98, if the Config.sys file does not exist, what file loads the following required drivers Ifshlp.sys, Himem.sys, and Setver.exe ?
autoexec.bat
win.com
io.sys
dblbuff.sys
Correct answer: io.sys
26. Can Windows NT4 read and write too a drive formatted with NTFS5 ?
NT4 can read but not write too an NTFS5 partition
NT4 can not read or write too an NTFS5 partition
NT4 can read and write too a drive formatted with NTFS5, only if service pack 3 is installed
NT4 can read and write too a drive formatted with NTFS5, only if service pack 4 is installed
Correct answer: NT4 can read and write too a drive formatted with NTFS5, only if service pack 4 is installed
27. In win 2000 what command creates a new root directory and file system for a hard disk ?
Format
Fdisk
Ntdisk
Correct answer: Format
28. In win 2000 the format command can check for bad areas on the disk, and it can delete all data on the disk.
True False
Correct answer: True
Explanation: The format command creates a new root directory and file system for the disk. It can also check for bad areas on the disk, and it can delete all data on the disk. For Windows 2000 to be able to use a new disk, you must first use this command to format the disk. You must have Administrator rights to format a hard disk.

http://www.justvb.net/it/